Abstract
PurposeThis study aims to determine the braking performance of limestone as a filler in brake friction materials.Design/methodology/approachSamples containing limestone material (30-35-40%), which can be an alternative to brake friction material filler, were produced. The samples were weighed on precision scales, mixed homogeneously and produced using the hot molding method. The physical and tribological properties of the produced samples were determined, and their microscopic analyzes were made with scanning electron microscopy.FindingsAs the amount of limestone increased, the density of the samples decreased. The friction coefficient and wear rates were close to each other and within the optimum limits for all samples. Limestone materials can be used instead of barite materials studied in the literature on brake linings. Microcracks were observed only in samples containing 30% and 35% limestone in microscopic images.Originality/valueIn this study, the wear rate, coefficient of friction and microstructures on the friction surfaces of brake friction materials containing limestone were investigated. The usability of limestone as a filler in brake friction materials provides valuable information to researchers and industrial organizations in the brake friction material field.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
