Abstract
ABSTRACT Novel AlCuFeMnTi–X high-entropy alloy (HEA) powder mixture with individual X = Mg, Si, Zn was mechanically alloyed for 45 h and consolidated at 700°C by spark plasma sintering (SPS). The effect of the addition of Mg, Si and Zn was studied on the microstructural evolution, density and microhardness of the developed HEAs. The results demonstrated that milled HEAs were body-centered cubic (BCC) structured (BCC1 and BCC2). The BCC2 fraction was highest in AlCuFeMnTi–Zn followed by AlCuFeMnTi–Si. However, minor Ti, Si and intermetallic compounds (IMC) were observed in AlCuFeMnTi–Mg with BCC1 major phase. After SPS, the alloying improved, and BCC2-rich HEAs were observed for all compositions. An attractive hardness value was obtained in AlCuFeMnTi–Mg due to the dispersed Cu2Mg precipitates in the BCC2/BCC1 matrix followed by AlCuFeMnTi–Si and AlCuFeMnTi–Zn HEA, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.