Abstract
Addition of solutes such as lithium enhances ductility of hexagonal-close-packed (hcp) magnesium (Mg). However, the atomistic underpinning of Li addition on individual deformation mechanisms remain unclear and is the focus of the present work. We compared the deformation mechanisms in nanocrystalline (NC) and single crystal simulation systems of pure Mg and Mg-Li hcp alloys. Five deformation modes are observed in the pure NC Mg with randomly oriented grains – one basal {0001}〈112¯0〉, one pyramidal type-I {101¯1}〈112¯3〉, and three twinning slip systems {101¯2}〈101¯1〉,{101¯3}〈303¯2〉, and {101¯1}〈101¯2〉. Distributing 10at.% Li randomly to this NC Mg decreased its compressive yield strength by 14.5%. This also increases the ductility by activating non-basal deformation modes and by reducing the plastic anisotropy. We benchmarked these results by comparing the effect of Li addition on these deformation modes in Mg single crystals. Finally, we present a formability parameter (Fp) model based on unstable stacking fault energy, twin fault energy, and nucleation stress for dislocations (τNS). Quantifying the changes in Fp values for the Mg-Li alloys with respect to pure Mg in single crystal simulations explain the decrease in compressive yield strength and change in deformation mechanisms with Li additions. A sensitivity analysis study, comparing our CD-EAM results with a MEAM potential, shows that the effects of Li on the single deformation mechanisms are potential independent. Lastly, while results for Mg-10at.% Li random alloy are presented here, similar conclusions can be drawn for other compositions of this hcp Mg-Li alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.