Abstract
Abstract The performance of thermal barrier coatings with the double-layer top coat in thermal shock condition has been investigated. Used powders to produce coatings are as follows: Yttria Stabilized Zirconia (YSZ, Y), Ceria-Yttria Stabilized Zirconium Oxide (CSZ, C) and nano-structured YSZ (YSZ-N, YN). The samples were classified into four double-layer families, including Y-C, YN-C, Y-YN and YN-Y. At the end of each cycle, samples were photographed, and the surface and edge damage were determined. Furthermore, scanning electron microscope (SEM) Images and energy-dispersive spectrometer (EDS) analysis of sample's cross-section were taken before and after the test. After collecting experiment's data, the effects of various factors on the outputs were checked. The results showed that Y-YN, YN-Y and YN-C families, have the best performance, respectively. Moreover, it was found that using YSZ-N as the top layer, reduces the thickness of TGO, and it has a great effect on performance and the amount of damage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
