Abstract
The Laser Surface Texturing (LST) technique has been largely investigated to improve the tribological performance of lubricated contacts. The present contribution is aimed at scrutinizing the influence of three texture configurations fabricated by LST on the tribological performance of elastohydrodynamic (EHD) point contacts under different slide-to-roll ratios (SRR), entrainment velocities and inlet temperatures. Friction experiments were conducted through a series of ball-on-disk tests in the MTM-2 (Mini-Traction Machine) tribometer. Main results showed that the texture configurations promoted significant effects under boundary and mixed lubrication conditions, and also affected the full-film EHD regime at higher temperatures. Furthermore, the tribological performance of textured samples was strongly related to the texture depth. Shallower texture designs (∼0.5 μm) reduced friction compared to untextured material, whereas deeper features (>1 μm) generally led to detrimental results. In general, dimples configuration decreased the lift-off speed and promoted full-film EHD conditions for a larger range of speeds, whereas radial curved grooves yielded to friction reduction under mixed lubrication conditions, moving the transition from boundary to mixed regimes to lower speeds, especially for intermediate lubricant viscosity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.