Abstract
In the present study, laser shock peening (LSP) was employed to enhance the rotating bending fatigue life of 1Cr12Ni3Mo2VN martensitic stainless steel used in steam turbine blades, addressing the issue of insufficient fatigue performance in these components. The aim of this study was to investigate the effect of LSP on the microhardness, residual stress, and rotating bending fatigue life of 1Cr12Ni3Mo2VN steel samples. The microhardness of LSP-treated samples was increased by 10.5% (LSP-3J sample) and 15.3% (LSP-4J sample), respectively, compared to high-frequency hardening samples. The residual compressive stress of the LSP-4J sample was the largest, reaching −689 MPa, and the affected layer depth was about 800 μm. Fatigue tests showed that the number of cycles at the fracture point for the LSP-3J and LSP-4J samples increased by 163% and 233%, respectively. The fatigue fracture morphology of the four samples showed that the microhardness and residual compressive stress distribution introduced by LSP could effectively inhibit the initiation of surface cracks, slow down the crack growth rate, and improve the rotating bending fatigue life of 1Cr12Ni3Mo2VN.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
