Abstract
• Micro-scale Fe82Cr16SiB coating is prepared by single-layer extreme high-speed laser cladding. • The flatness of Fe82Cr16SiB coating and structural refinement could be improved by laser remelting. • The corrosion resistance, hardness and wear resistance of Fe82Cr16SiB coating are improved by remelting treatment. With scanning speeding of 20 ∼ 200 m/min, extreme high-speed laser cladding is a high-efficiency choice to fabricate thin protective coatings with thickness of 0.01 ∼ 0.25 mm on metal parts. Laser remelting is considered as an effective strategy to improve surface characteristics. In the present paper, mirco-scale Fe82Cr16SiB alloy single-layer coatings are successfully prepared on H13 steel substrate by above integrated process with slow scanning speed below 5 m/min. The flatness of the defect-free coatings is substantially improved with the formation of a refined gradient microstructure along the growth direction. The remelted coating exhibits enhanced corrosion resistance, higher hardness, good wear resistance with lower friction coefficient.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.