Abstract

The effect of laser heating on the local concentration of a white Ba(NO3)2 or BaO2 sample in a stationary in situ Raman cell, as determined by Raman spectroscopy, was addressed in this study. The decomposition of Ba(NO3)2 and crystalline BaO2, both supported on MgO, was followed as a function of the temperature of the cell with the use of Raman spectroscopy and product analysis by gas chromatography. At a laser power level of 25 mW and with the sample at 580°C, the decomposition curves were offset by about 3°C, rather than by a temperature difference of more than 15°C that might be expected from laser heating. Diffusion of NO3- and O22- ions from the surrounding region into the 100 mu m-size spot heated by the laser apparently compensates for the loss of materials at the higher temperature. As a consequence, for in situ catalytic studies, the concentrations determined by Raman spectroscopy may be more representative of the sample than one might expect from the local temperature.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.