Abstract
AbstractLow oxygen environments in biomass gasification and the presence of chlorine in feedstocks can influence the corrosion rate of steel by affecting the formation of protective oxide scales. The effect of KCl on the high‐temperature corrosion of low‐alloyed steel (13CrMo4‐5) under low oxygen partial pressure is investigated by KCl salt spray (0.1 mg·cm−2) and exposure to 3 vol% H2 + 30 vol% H2O + Ar (balance) at 500°C for up to 168 h. Specimens without KCl salt are exposed for reference. Specimens are characterized after exposure by mass change, SEM/EDS, and XRD. KCl‐deposited specimens exhibit about 30% lower mass gain after exposure compared to non‐sprayed specimens. Their scale shows a porous innermost layer and a denser layer on top. No Fe or Cr chlorides are identified. The specimens without salt exhibit a similar two‐layered scale, with a porous inner Fe‐Cr oxide, followed by a denser and thicker Fe‐oxide above. KCl could potentially protect the surface from further degradation by physically covering the specimen, altering the scale morphology, and forming a less permeable barrier, hindering the transport of species through the scale.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
