Abstract

Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels containing N-[3-(N,N-dimethylamino)propyl]methacrylamide (DMAPMAAm), 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA) and [3-(methacryloylamino)propyl]trimethylammonium chloride (MAPTAC) as cationic monomers were cross-linked with N,N’-methylenebisacrylamide (BIS) and tetraallylammonium bromide (TAB). The swelling degrees, uniaxial compression moduli and L-ascorbic acid (L-AA) releases of these cationic PNIPAAm hydrogels synthesized in 1,4-dioxane were compared with the one prepared in distilled–deionized water (DDW) and in aqueous sodium hydroxide solution (0.1 N NaOH). P(NIPAAm-co-MAPTAC)/BIS and P(NIPAAm-co-DMAEMA)/BIS hydrogels at 37 °C in DDW and at 37 °C/pH 4 exhibited higher gel strengths and compressive moduli than all the others cross-linked and copolymerized with TAB and DMAPMAAm, respectively. All the observations indicated that the physical cross-linking points created by ionomer pairs of MAPTA+Cl− units and the hydrophobic contributions of ester groups in the DMAEMA units might be a reason of their improved mechanical properties in DDW at 37 °C. Further, the charge screening effect of chloride ions in the swelling medium at pH 4 also resulted in the improved compressive moduli compared to the ones in DDW. The water diffusion into/from all the copolymeric PNIPAAm hydrogels during the swelling/deswelling processes at 25 °C/37 °C in DDW and their L-AA releases at 37 °C in DDW also revealed the importance of these ionic and hydrophobic effects. Water transport through the ones cross-linked with TAB was controlled by non-Fickian process due to the repulsive forces between the quaternized ammonium groups on the chemical cross-links while in the case of P(NIPAAm-co-MAPTAC)/BIS, water transport followed Fickian diffusion because the multiplet formations behaved as additional cross-links. Furthermore, P(NIPAAm-co-MAPTAC)/BIS hydrogel due to the ionomer-multiplet transitions at 37 °C in DDW has exhibited less-Fick diffusion that resulted in a lower diffusion coefficient during the release of L-AA as compared to the others.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.