Abstract
Carbon nanotubes and boron carbide particles were added in aluminum alloy 5083 by friction stir processing to obtain hybrid surface composites. Single pass approach was adopted to investigate the effect of metal loss in cavities produced to incorporate reinforcements at the inter-cavity spacing of 8mm and 10mm. Optical and scanning electron microscopy were used for microstructural investigation and presence of any defects. Mechanical characterization showed up to 38% and 18% improved performance of 10mm inter-cavity spacing composites containing boron carbide particles in tensile strength and hardness, respectively. Cold formability of friction stir processed composites was evaluated by Ubend ductility test. The composites containing carbon nanotubes with 8mm inter-cavity spacing failed due to severe cracking caused by clustering and lower compensation to accommodate the material loss, which played a vital role in final mechanical properties. The sinking of reinforcement in the matrix was found to be essential to compensate the material loss. In case material loss in the form of cavity for reinforcements remains uncompensated, higher empty volume results in the deterioration of mechanical properties. 10mm inter-cavity spacing allowed maximum sinking of reinforcements and minimum clustering with carbon nanotubes in single pass friction stir processing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.