Effect of insulator profile on aging performance of silicone rubber insulators in salt-fog

Abstract

The paper presents the results of the study on the influence of insulator profile on the aging performance of silicone rubber (SIR) insulators in salt-fog. Experiments have been conducted on various two-shed arrangements at 35 V/mm average stress and 0.25 S/m salt-fog conductivity level. The work is also extended to include commercial 15 kV class insulators with different profiles. Shed spacing, shed diameter, alternate shed design and shed shape are the parameters investigated in this study. The low frequency harmonics of the leakage current, early aging period (EAP), and equivalent salt deposit density (ESDD), are used to evaluate the aging performance of different designs. Insulator profile is shown to greatly influence the aging performance of SIR insulators. Shed shape proves to be the most important parameter to be considered in designing non-ceramic insulators profiles. Also, as the shed spacing decreases, the performance of SIR insulators improves. Simulation results using FEMLAB show that the electric field on insulators is below the corona onset at both dry and wet conditions. Dry band arcing is therefore the main electrical cause for aging in distribution class insulators and it is possible to improve the pollution performance of SIR insulators using appropriate profiles as suggested in this work