Abstract
In this paper, the effect of particle velocity on the characteristics of atmospheric plasma-sprayed yttria stabilized zirconia was investigated through adjusting auxiliary helium flow rate. The temperature and velocity of in-flight particles were measured with the DPV2000 diagnostic system. The results showed that helium flow rate significantly influenced particle velocity and less distinctly influenced particle temperature. The microstructure of the coatings was characterized by scanning electron microscopy and X-ray diffraction analyzer. The ionic conductivity of the deposits through thickness direction was measured by a potentiostat/galvanostat based on three-electrode assembly approach in a temperature range of 500–1000 °C. The specific gas permeability was estimated through measuring the coating gas flow rate with a home-made experimental setup. The results showed that the gas permeability was improved by increasing the in-flight particle velocity. However, the in-flight particle velocity had little effect on the ionic conductivity of specimens.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
