Abstract
The effect of idle time before process started on the ultra low-k (ULK) film's property (thickness, refractive index, stress) was studied in this paper. The results show that as idle time increase from 0s to 600s, the ULK film's thickness is decreased about 100∼150A while the refractive index has no evident change. As idle time increase from 0s to 420s, the ULK film's stress is decreased about 4∼5Mpa. The thickness decrease mainly comes from the main-deposition stage, slightly come from the initial stage, while the transition stage nearly has no influence on it. The root cause of thickness changes is related to the competitive relationship of film deposition between wafer and chamber body when chamber idle. Base on the experiment results, the automatic process control (APC) system can be introduced to compensate the film thickness loss caused by idle time automatically, thus realize the stability of ULK process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.