Abstract
The kinetic behavior has been studied for cracking a commercial feedstock on a hybrid catalyst (with 5 wt % of HZSM-5 zeolite) made up of 80 wt % of a catalyst equilibrated in a fluid catalytic cracking (FCC) unit and of 20 wt % of a catalyst prepared based on a HZSM-5 zeolite. A laboratory-scale reactor which allows for operation under conditions similar to those of commercial FCC units has been used. From the analysis of the gases and gasoline obtained in the 500−550 °C range, with contact times between 2 and 10 s and for a catalyst/feedstock = 6, the influence of HZSM-5 zeolite presence in the catalyst on gas and gasoline composition and on gasoline research octane number has been analyzed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.