Abstract
AbstractCarbon fiber‐reinforced polymers have been widely applied in structural parts and components in several sectors, in addition to being constantly used in environments with the presence of humidity and high temperatures, which can affect their density, hardness, and rigidity. In this work, the influence of hydrothermal conditioning on carbon fiber (CF)/epoxy composites was investigated using three types of epoxy resin and two different CF fabric reinforcements, that is, plain weave and eight harness satin (8HS) arrangements. The CF/epoxy composites were subjected to compression after impact (CAI) test by 28 and 40 J energy and then exposed to hydrothermal conditioning for 8 weeks. After the CAI tests, the visual analysis of all composites presented microbuckling mechanisms. The composites tested with 40 J energy absorbed only 2% more moisture compared with the other composites, nonimpacted, and tested with 28 J, indicating that the impact damage did not cause delamination between the layers of the composites, which could facilitate the absorption of water. All composites analyzed showed resistance to CAI even after exposure to humidity, with decreases ranging from 2.8% to 23.8% about the unconditioned specimens. The decrease in CAI also shows the influence of the type of epoxy matrix and the arrangement of the CF in fabrics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
