Abstract
In this paper, the effect of the pretreatment method combined with hydrothermal treatment and in situ mechanical compression (HT-MC) on the pyrolysis characteristics of oily sludge (OS) was investigated. The results of the thermal analysis showed that the temperature range in different pyrolysis stage intervals shifted to a lower level and the weight loss rate decreased significantly after HT-MC. Isoconversional methods were employed with an estimated apparent activation energy of 92.66 –198.21 kJ·mol−1 for the pyrolysis of OS after HT-MC. As the hydrothermal temperature increased to 240 °C, the yield of char increased from 80.44 to 86.08 wt%, and the yield of oil decreased from 16.03 to 11.23 wt%. Compared to the raw material, the gas products from the pyrolysis of OS after HT-MC had a higher H2 concentration and yield. The analysis results of GC-MC showed that, compared with the pyrolysis oil obtained by direct pyrolysis, the content of olefins in pyrolysis oil obtained in pyrolysis of OS after hydrothermal treatment increased from 0.86 % to 5.73 %. Furthermore, the relative content of alkanes in pyrolysis oil increased from 76.12 % to 87.40 % with the rise of hydrothermal temperature from 160 to 240 °C.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
