Effect of hydrostatic pressure and temperature on the chemical and functional properties of wheat gluten III. Studies on gluten films

Abstract

Numerous gluten preparations were produced by the variation of pressure and temperature. Optimal conditions for the production of gluten films on a laboratory-scale were by suspending of gluten (1 g) in a mixture of ethanol (3 mL), glycerol (0.5 g) and conc. formic acid (10 mL), casting and drying at 40 °C. Small-scale laboratory methods for the production of gluten films by casting and moulding were developed. Film strips obtained were examined by micro-extension tests, which resulted in curves similar to extensigrams for dough and gluten and allowed the determination of the resistance to extension, extensibility and elasticity. The results demonstrated that pressure treatment of gluten in combination with variable cultivars, temperature, process parameters and additives, allow the production of films with a wide range of rheological properties – from soft and smooth to strong and hard rubber like. Finally, it was demonstrated that the addition of fibres to gluten enhanced the stability of films. Thus, high pressure treatment allows a selective modification of gluten as raw material for film production. In comparison with conventional plastic films, gluten films have considerable advantages, because they can be produced from renewable plants and they are readily biodegradable.