Abstract

Direct-injection diesel engines have become prime candidates for future transportation needs owing to their high thermal efficiency. However, the increase in nitrogen oxides (NO x) within local high-temperature regions and the increase in particulate matter within the diffusion flame region during diesel combustion are problematic and must be resolved. The utilization of NO x-absorbing catalysts, based on the concept of NO x storage and release, is one of the most promising techniques able to reduce NO x emissions within net oxidizing gas conditions. This type of NO x removal system, called the lean NO x trap (LNT) catalyst, absorbs NO x under lean exhaust gas conditions and releases NO x under rich conditions. This technology provides the advantage of high NO x conversion efficiency; however, the correct amount of reducing agent must be supplied within the catalytic converter under appropriate conditions in order to guarantee a high NO x reduction efficiency. In this research, the performance characteristics of an LNT, using a hydrogen-enriched gas as a reductant, were examined via various injection strategies and rich exhaust gas conditions. Although the hydrogen concentration of hydrogen-enriched gas also affects the LNT performance, the composition of hydrogen-enriched gas was fixed as a similar composition to that for the ideal re-forming of diesel fuel. The NO x reduction efficiency is closely connected to the injection timing and duration of reductant flow. When the injection was introduced 1.5 s after throttling, the LNT NO x conversion was maximized. However, the LNT NO x conversion decreased when the injection timing was earlier or later than 1.5 s. Because the actual rich duration of the exhaust gas is limited at a specific point during the rich operation for 3 s, the LNT NO x conversion was maximized when the hydrogen-enriched gas was injected at the minimum air-to-fuel ratio observed at the LNT inlet. By optimizing the control of this flow, the system encounters only a 1.9 per cent fuel penalty while maintaining a 90 per cent NO x reduction efficiency.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call