Effect of hybrid filler comprising cryptocrystalline graphite and multi‐wall carbon nanotubes on the mechanical and conductive properties of styrene butadiene rubber

Abstract

AbstractStyrene butadiene rubber (SBR) composites reinforced by cryptocrystalline graphite (CG) and multi‐wall carbon nanotubes (MWCNTs) were prepared. The SBR composite with 50 phr CG content displays superior mechanical reinforcement achieving 20.7 MPa in tensile strength. However, the electrical conductivity enhancement is modest. After incorporating MWCNTs as a secondary filler, the electrical conductivity significantly improved. The results show that the electrical conductivity of the SBR composite reinforced with 10 phr of CG and an additional 5 phr of MWCNTs surpasses that achieved by using 50 phr of CG solely. This enhancement can be attributed to the inherent excellent electric conductivity and high aspect ratio of MWCNTs, with their presence also preventing the re‐agglomeration of CG. Furthermore, within 10–40 phr content of CG, the mechanical reinforcement of CG‐SBR composites is enhanced with the addition of MWCNTs, whereas a minor decline in tensile strength is noted when the concentration of CG above 40 phr. Overall, the SBR composite reinforced with a synergistic combination of CG and MWCNTs is achieved, demonstrating both exceptional mechanical and conductive properties.Highlights Styrene butadiene rubber (SBR) composites with different cryptocrystalline graphite (CG) phr and additional multi‐wall carbon nanotubes (MWCNTs) were characterized. CG‐SBR displays good mechanical property but limited electrical conductivity. Proper ratio of CG/MWCNTs significantly enhances various properties. MWCNTs act as a “bridge” structure connecting isolated CG filler in SBR matrix. MWCNTs network effectively prevents the re‐agglomeration of CG nanosheets.