Abstract
To achieve efficient connectivity of dissimilar γ'‐strengthened superalloy, transient liquid‐phase (TLP) diffusion bonding of 718Plus and Ni3Al‐based superalloys is carried out using BNi‐2 interlayer at a constant temperature of 1100 °C with holding times of 3, 15, 30, and 60 min. It is shown in the results that when the holding time is insufficient, isothermal solidification transforms into athermal solidification. Due to the enrichment of B and Cr elements in liquid phase, ternary eutectic consisting of γ, Ni3B, and CrB is formed at the joint center. Ternary eutectic with higher hardness (≈600 Hv) is poorly bonded to the matrix, which can easily become crack initiation location and significantly deteriorated the tensile properties. In addition, microhardness of the joint becomes more uniform and tensile strength gradually increases due to the reduction of eutectic with holding time increasing. Isothermal solidification completes and a joint without eutectic structure is formed at 1100 °C for 60 min. Diffusion of Al atoms leads to the formation of γ' with gradient size and tensile strength is comparable to that of base metal which is about 690.93 MPa.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
