Abstract

BACKGROUND: In recent years, zirconia prostheses have gradually become a mass type of orthopedic treatment. The production of zirconium dioxide blanks for dentistry has also been launched in our country. In recent years, the possibility of speed sintering of dental prostheses made of zirconia has been widely calculated, which makes it possible to reduce the process of manufacturing structures by four to five times.
 AIM: To investigate the effect of high-speed sintering on important properties, such as strength characteristics during three-point bending and color parameters at 10 different modes of speed sintering of ceramic materials.
 MATERIALS AND METHODS: The work uses samples obtained by computer-aided design and computer-aided manufacturing milling from domestic Ziceram T blanks, color A2. Depending on the firing modes, the samples were divided into 11 groups. The strength of the sintered samples was studied with three-point bending on a bursting machine. The color parameters of the samples were determined on the Spectron-M color analyzer in the CIE L*a*b system on a white and black background using acceptable norms of color difference and characteristics of color shades.
 RESULTS: According to the results of tests for resistance to bending, susceptibility has an approximate value of more than 300 MPa. According to ISO 6872, this flexural strength is sufficient for the fabrication чof single crowns in both anterior and posterior teeth. An increase in the lightness of ceramic samples based on zirconium dioxide from domestic factories Ziceram T of Zircon Ceramics was established. The reduced firing time led to an increase in body weight, which is associated with a decrease in their intensity.
 CONCLUSION: Express firing modes of ceramics based on zirconium dioxide Ziceram T guarantee the achievement of the required strength. However, none of the studied firing modes allowed achieving the color parameters of the control samples.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.