Abstract
Ultrasonic surface rolling process (USRP) is a combination of ultrasonic impact and deep rolling techniques. However, the addition of ultrasonic vibrations complicates the working mechanism of USRP tools. Existing studies rarely consider the evolution of dynamic characteristics in USRP tools resulting from changes in ultrasonic amplitudes, which undoubtedly exert a significant influence on surface properties. Moreover, they typically limit the ultrasonic amplitude to a small range. This study aims to identify the boundary process parameters to differentiate between stable and unstable dynamic characteristics during USRP and to compare their effects on the surface integrity and the plastic deformation. Therefore, an equivalent USRP tool model was proposed to analyse the working mechanism at a large-scale ultrasonic amplitude. The boundary USRP parameters responsible for different dynamic characteristics were experimentally explored. Finally, comparative USRP experiments on the Ti-6Al-4 V alloy were conducted, and it was observed that USRP parameters under stable dynamic characteristics were beneficial to the excellent surface roughness. Conversely, altering the ultrasonic amplitude to attain unstable dynamic characteristics leads to a notable degradation in the surface quality; however, the extent of plastic deformation is significantly increased. This study provides insights into the effects of dynamic characteristics in USRP, thereby contributing to a deeper understanding of the process and facilitating effective design of process parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.