Abstract
Series of ceria-zirconia (CZ)-based nano-materials with a d50 in the range of 0.2 to 1.3 microns were made using the jar milling, Eiger milling, and steam jet milling (SJM) techniques. The effect of the milling conditions on the morphology and textural properties was studied. High-energy steam jet milling in a quasi-hydrothermal environment (with potential local temperature spikes over 500 °C) significantly impacted the CZ crystal structure by inducing lattice distortions. It was shown that the acquired lattice stress resulted in a significant increase in oxygen mobility, which was manifested by a TPR-H2 Tmax shift from 450–550 to 150–250 °C. CZ materials with fast oxygen mobility are metastable phases, and re-slurring nano-CZ powders in water and impregnation with precious metals had stabilizing effects on fast oxygen mobility. Efficiently enhancing the CZ redox activity milling process took place in the following order: Steam jet milling > Eiger milling > jar milling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
