Effect of high- and low-energy entrance surface dose allocation ratio for two-shot dual-energy subtraction imaging on low-contrast resolution

Abstract

IntroductionDual-energy subtraction (DES) imaging can obtain chest radiographs with high contrast between nodules and healthy lung tissue, and evaluating of chest radiography and evaluating exposure conditions is crucial to obtain a high-quality diagnostic image. This study aimed to investigate the effect of the dose allocation ratio of entrance surface dose (ESD) between high- and low-energy projection in low-contrast resolution of soft-tissue images for two-shot DES imaging in digital radiography using a contrast-detail phantom (CD phantom). MethodsA custom-made phantom mimicking a human chest that combined a CD phantom, polymethylmethacrylate square plate, and an aluminum plate (1–3 mm) was used. The tube voltage was 120 kVp (high-energy) and 60 kVp (low-energy). The ESD was changed from 0.1 to 0.5 mGy in 0.1 mGy increments. Dose allocation ratio of ESD between 120 kVp and 60 kVp projection was set at 1:1, 1:2, 1:3, and 2:1. Inverse image quality figure (IQFinv) was calculated from the custom-made phantom images. ResultsWhen the total ESD and aluminum thickness were constant, no significant difference in IQFinv was observed under most conditions of varied dose allocation ratio. Similarly, when the total ESD and the dose allocation ratio were constant, there was no significant difference in IQFinv based on the aluminum plate thickness. ConclusionUsing IQFinv to evaluate the quality of the two-shot DES image suggested that dose allocation ratio did not have a significant effect on low-contrast resolution of soft-tissue images. Implications for practiceThe present results provide useful information for determining exposure conditions for two-shot DES imaging.