Abstract
AbstractIn this study, Shell and tube heat exchanger (STHX) with 22% cut segmental baffles and helical baffles with 20°, 30°, 40° inclination angles are considered for three‐dimensional CFD analysis using the ANSYS FLUENT tool to investigate the performance of STHX. OHTC and comprehensive performance index are higher for 40° helical baffles when compared to segmental baffle and 20°, 30° helical baffle heat exchangers with water as working fluid. Hence, further investigations are carried out for 40° helical baffle heat exchangers. Numerical investigations are extended with nanofluids (Al2O3, CuO, and SiO2) at 1%, 3%, and 5% volume concentrations for each nanofluid. Under the same mass flow rates, 40° helical baffles with Al2O3nanofluid as working fluid provided better heat transfer rates when compared to the other two nanofluids and base fluid. Also, the authors noticed that the 5% volume (vol) concentration nanofluids provided better heat transfer enhancements when compared to 1%, 3% volume concentrations, and base fluid. Enhancements (10.33%–8.24%) from lower to the higher mass flow rate in 40° HB with Al2O3nanofluid at 5% volume concentration are observed when compared to water as base fluid.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
