Abstract
Ni-20wt.%Al coating was fabricated on the 6061-T6 aluminum alloy substrate in twin wire arc spraying technology. Heat treatment temperature was 400°C，480°C and 550°C, and each heat treatment time was 4h, 24h and 48h. Reaction mechanism and diffusion behavior of elements of coating/substrate interface were discussed. The XRD results showed that NiAl and Ni3Al phases were diminished and the nickel solid solution was gradually improved in volume. And some oxide phases existed, such as two types of alumina and nickel oxides. The SEM and EDS analysis showed, there was no obvious diffusion. At the low temperature condition, the diffusion phenomenon was existed in the interface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
