Abstract
This study presents the investigation of the influence of heat treatment on microstructure, hardness and tensile properties of high-speed selective laser melted Ti6Al4V components. Heat treatment was performed to obtain an improved microstructure with enhanced hardness and tensile properties. It was found that the acicular martensitic α′ structure on the as-built sample lead to high hardness, yield strength and ultimate tensile strengths of 389±10 HV0.3, 949 ± 10 MPa and 1045 ± 3 MPa, respectively,with a low ductility of 5%. Heat treatment transformed the martensitic α′ structure into lamella α + β phases, with heat treatment at 1000 °C resultingin the most improved hardness and ductility from 389 ± 10 HV0.3and 5% to 325 ± 20 HV0.3and 13%, and a decrease in yield and ultimate tensile strength from 949 ± 10 MPa and 1045 ± 13MPa to 835 ± 11 MPa and 911 ± 5 MPa, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
