Effect of heat input of TIG repair welding on microstructure and mechanical properties of cast AZ91 magnesium alloy

Abstract

In the present study, the effect of heat input of gas tungsten arc welding on the microstructure and mechanical properties of AZ91 magnesium alloy was investigated. The microstructural studies were performed by using an optical microscope and scanning electron microscope equipped with energy dispersive X-ray spectroscopy, and tensile test was used to evaluate the mechanical properties. It was shown that, comparing to the base metal, a fine microstructure of α(Mg) and Mg17Al12 phase is formed in the weld metal and the size of α(Mg) phase slightly increased with heat input during welding process. The results also indicated that the thickness of partially melted zone increased with heat input. Tensile strength of welded samples was lower than that of the base metal and it decreases with increasing heat input. Failure of the welded specimens accrues in the partially melted zone. Studying of fracture surface revealed that the interface of α(Mg) and Mg17Al12 compound acts as crack initiation and growth path during the tensile test. Formation of cleavage steps in the fracture surface was the dominant fracture mechanism during tensile tests.