Effect of hardness on multiaxial fatigue behaviour and some simple approximations for steels

Abstract

ABSTRACTConstant‐amplitude in‐phase and 90° out‐of‐phase axial‐torsional fatigue tests were conducted on tubular specimens made from a medium‐carbon steel with three hardness levels obtained from normalizing, quenching and tempering and induction hardening to find the effect of hardness on multiaxial fatigue behaviour. In addition, the same loadings were applied on the normalized solid specimens to investigate the effect of specimen geometry on multiaxial fatigue life. Similar fatigue life variation as a function of hardness was found for in‐phase and out‐of‐phase loadings, with higher ductility beneficial in low‐cycle fatigue (LCF) and higher strength beneficial in high‐cycle fatigue (HCF). Multiaxial fatigue data were satisfactorily correlated for all hardness levels with the Fatemi–Socie parameter. Furthermore, in order to predict multiaxial fatigue life of steels in the absence of any fatigue data, the Roessle–Fatemi hardness method was used. Multiaxial fatigue lives were predicted fairly accurately using the Fatemi–Socie multiaxial model based on only the hardness level of the material. The applicability of the prediction method based on hardness was also examined for Inconel 718 and a stainless steel under a wide range of loading conditions. The great majority of the observed fatigue lives were found to be in good agreement with predicted lives.