Abstract
An additive manufacturing platform was developed for fabricating constructs with heterogeneous properties. The liquid binder amount was investigated in calcium polyphosphate bone substitutes. Two part categories were produced with 150 and 190 μm layer thickness and 70, 80, 90, 100, and 90/70% gray scale. It was shown that the gray scale level had an effect on samples with 150 μm layer thickness where porosity ranged between 43 ± 1% and 49 ± 2% and the compressive strength varied between 4.8 ± 1.3 MPa and 15.5 ± 1.9 MPa. The results suggest that the binder gray scale level can be used to locally predict porous properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Applied Ceramic Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
