Abstract
Local flow measurements were performed for vertical upward bubbly flows in a 9 mm-diameter pipe at normal- and micro-gravity conditions. A stereo image-processing method was used for measuring void fraction profile, interfacial area concentration and Sauter mean diameter. The flow measurements were performed at four axial locations (axial distance from the inlet normalized by the pipe diameter, z/D=5, 20, 40 and 60) at various flow conditions of superficial gas velocity (0.00840-0.0298 m/s) and superficial liquid velocity (0.138-0.914 m/s). By taking into account the normalized parameters on void peak fraction and void peak intensity in pipe cross-section, the phase distribution pattern was quantitatively-classified into three patterns : a wall peak, a core peak and an intermediate peak. The phase distribution pattern maps were newly presented for vertical upward bubbly flows at normal-and micro-gravity conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
