Abstract
Al2O3 ceramic and 304 stainless steel were brazed by Ag-Cu-Ti filler. Graphite was added into the Ag-Cu-Ti filler to improve the properties of the joint. The effects of graphite content on the microstructure and properties of Al2O3/304 joint were investigated. The microstructure of the joint was Al2O3/Cu3Ti3O + TiCu/Ag(s,s) + Cu(s,s) + TiC + TiCu/Cu0.8Fe0.2Ti/Fe-Cr/304. The shear strength was 130.54 MPa with Ag-Cu-Ti. When 0.1 wt% graphite was added, strength of joint reached 203.49 MPa. The improvement of shear strength was attributed to the formation of TiC, which reduced the coefficient of thermal expansion (CTE) difference and refined the microstructure. When the graphite content exceeded 0.2 wt%, graphite would agglomerate in the joint, which deteriorated the mechanical properties of the joint.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
