Abstract
Abstract: In this study, the effect of fuel injection pressure on spray characterization of mahua biodiesel blend (B20) was visually analysed using CRDI fuel injection system. To analyse the spray characteristics, biodiesel blend fuel (B20) has injected at different injection pressures like 20, 30, 40and 50 MPa pressures. The fuel injection pressures and fuel injection durations were varied using electronic control module fitted with CRDI system. The spray structure of mahua biodiesel blend (B20) were recorded using a high-speed camera. For testing purpose one port of CRDI unit was connected with the solenoid fuel injector and other ports were closed. From the results obtained, it is clear that the spray tip penetration and spray cone angle were increased when the fuel injection pressure was increased from 20 to 50 MPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal for Research in Applied Science and Engineering Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.