Effect of friction pendulum bearing properties on behaviour of buildings subjected to seismic loads

Abstract

This study investigates the influence of the friction pendulum bearing (FPB) isolator characteristics on the nonlinear response of the buildings under various seismic excitations. To represent a wide range of assessment, 3, 6, and 9-storey steel framed buildings with twenty seven different isolation models of FPB were studied by identifying the local and global deformations. Three important parameters such as isolation period T (as 2, 2.5, and 3 s), effective damping ratio ß (as 0.05, 0.15, 0.25), and yield strength ratio Fy/W (as 0.025, 0.05, and 0.10) were used in the modelling of FPB. Two-dimensional model of the base-isolated steel frames were created and the nonlinear time history analysis was performed through a number of earthquake ground motions. The behaviour of the isolated frames was measured by the variation of isolator displacement, roof drift ratio, relative displacement, interstorey drift ratio, absolute acceleration, base shear, base moment, hysteretic curve, and dissipated energy. The benefits obtained through the adoption of the base isolation system were discussed. It was found that the seismic response of the base-isolated frames could be estimated accurately by adjusting the proper isolation period, yield strength ratio, and effective damping ratio for the case studied structures.