Abstract
Adiabatic foam was fabricated successfully using sodium silicate as the raw material with pre-sintered fly ash as additive. Fly ash was pre-sintered at 500 to 900 oC and the effect of the pre-sintering temperature on the performance, including the thermal conductivity, density, compressive strength and microstructure, was researched. The results show that the pre-sintering process effectively reduces the density of the samples while the thermal conductivity and compressive strength are higher than those of the samples fabricated by the fly ash without being pre-sintered. Moreover, the samples exhibit tri-modal spherical pore structure with macropores and mesopores. The pore size remains unchanged until the pre-sintering temperature exceeds 700 oC, and then starts to increase.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
