Abstract
In this paper, Aluminium metal matrix hybrid composite was fabricated using powder metallurgy, where MWCNT and burnt coal waste (pollutant) used as reinforcing materials. The density and hardness of specimen was calculated and influence of fly ash on them was discussed. It was observed that hardness had increasing effect for certain weight percentage of fly ash( up to 8 wt%) and above that level showed the negative effect on them. An increase of 63.6% in hardness and 107% in compressive strength was observed for the composite compared to pure aluminum. The increased ball milling time resulted in damage of CNT. Compressive strength test revealed that MWCNT along with fly ash addition resulted in the improvement of compressive strength compared to pure Al.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
