Abstract
Treating SPL by the low caustic leaching and liming process generates an inert nonhazardous residue called LCLL Ash and a fluorite byproduct Calcined LCLL Ash that is ground into a fine powder demonstrates pozzolanic behavior in cement. The effect of the calcination temperature and fluorite byproduct addition on the reactivity of LCLL Ash was studied by the compressive strength activity index, Frattini test and Rilem R3 tests followed by XRD analysis. At 800°C, the formation of nepheline causes alkali uptake, the LCLL Ash showed a slightly lower reactivity with 10% fluorite addition. At 1000°C, calcined LCLL Ash/CF showed a better amorphization of phases and increasing reactivity due to reactions between fluorite and sodium oxide. Unlike LCLL Ash, no delay in hydration or hydro reactivity was observed with calcined LCLL Ash/CF.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.