Abstract
The effect of spray–flat-wall interaction on the diesel combustion characteristics in a constant-volume vessel was investigated. A flat wall was fixed perpendicular to the nozzle hole axis. Three injection pressures of 100 MPa, 150 MPa and 200 MPa and a single nozzle hole with a diameter of 0.133 mm were employed. Mie scattering was adopted to detect the spray formation process; OH* chemiluminescence and natural colour luminosity were conducted to analyse the combustion process. The two-colour method was applied to calculate the soot emissions and the temperature distribution. The results reveal that, in comparison with a free spray flame, flat-wall impingement causes diesel combustion to deteriorate when the liquid phase–wall interaction occurs; however, when an appropriate impinging distance (longer than liquid-phase penetration) is selected, combustion is observed to be enhanced. As for the impinging spray flame, when the injection pressure is increased, soot formation decreases; however, combustion is not linearly enhanced by increasing the injection pressure, and the OH* chemiluminescence intensity achieves the highest value with an injection pressure of 150 MPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.