Abstract

The effect of the finite film thickness on the microwave surface impedance was investigated theoretically and experimentally. It was found that the surface resistance is enhanced due to the altered current density distribution in the film as well as power transmission through the film. The surface resistance of an YBa/sub 2/Cu/sub 3/O/sub 7- delta / thin films grown epitaxially on LaAlO/sub 3/ by laser ablation has been determined from data measured at 87 GHz by the closed-cavity method. At T=77 K, an effective surface resistance of (30+or-8) m Omega was measured, resulting in a corresponding value in the limit of infinite film thickness of (15+or-8) m Omega . >

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.