Abstract
The effects of fillers (talc and calcium carbonate) were investigated on polypropylene /ammonium polyphosphate/polyamide-6 (PP/APP/PA-6) intumescent system by using mechanical testing, LOI method, cone calorimetry and thermoanalytical techniques. Calcium carbonate and talc affect the fire protective properties of PP/APP/PA-6 system in different ways. It is shown that talc induces an increase in the Young's modulus and a decrease in the elongation at break. Calcium carbonate leads to a decrease in the elongation at break, but there is no improvement in the Young's modulus. Talc increases fire protective performance due to forming a ceramic like protective shield at the surface, whereas calcium carbonate decreases it because of a reaction with APP. Effects of talc and calcium carbonate were furthermore investigated on PP/APP/PA-6 system by measuring Rate of Heat Release (RHR), Total Heat Emitted (THE), CO/CO 2 evolution and residual mass. Results are interpreted by means of decomposition, chemical reaction between components and formation of a protective shield at the surface at ignition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
