Effect of Fiber Cross-Sectional and Surface Properties on the Degradation of Biobased Polymers.

Abstract

Biobased polymers such as polylactic acid (PLA) and polybutylene succinate (PBS) break down naturally under certain environmental conditions. The efficiency of degradation can be linked directly to fiber surface properties, which influence polymer accessibility. Here, the degradation of PLA and PBS fibers with six different cross-sections was investigated. The fibers were aged by hydrolysis and UV exposure in an accelerated weathering test, followed by an ISO 20200 laboratory-scale disintegration test with non-aged fibers as controls. The polymers were analyzed by differential scanning calorimetry, Fourier transform infrared spectroscopy, and gel permeation chromatography, comparing the polymer granulate, virgin fibers, and UV-exposed fibers. It was found that the molecular mass and crystallinity of PBS changed more than PLA during spinning. Several PLA samples were completely degraded, whereas all the PBS samples remained intact. Furthermore, surface openings appeared on the PLA fibers during weathering, suggesting greater sensitivity to UV exposure and hydrolysis than PBS. A clear correlation between the fiber surface area and the degradation rate was observed for all samples, but the correlation was positive for PLA and negative for PBS. The slower degradation of PBS fibers with a larger surface area may reflect the ability of PBS to preserve itself by further crystallization during degradation processes at temperatures higher than the glass transition point. The data clearly show that the analysis of single degradation mechanisms is insufficient to predict the behavior of material under real-world conditions, where different degradation mechanisms may work in parallel or consecutively, and may show interdependencies.