Effect of feedstock solution concentration on the spectroscopic and electrical transport properties of thermal plasma synthesized ZnO nanoparticles

Abstract

The structural, optical, spectroscopic, and electrical transport properties of zinc oxide (ZnO) nanoparticles prepared using the solution precursor plasma spray (SPPS) technique were investigated for different feedstock solution concentrations such as 1-mol and 4-mol. Rietveld refined powder X-ray diffraction and Raman spectra reveal that the prepared ZnO crystallizes in a hexagonal wurtzite structure with no secondary phase. The crystallite sizes for 1-mol and 4-mol samples are 27.5 nm and 31.3 nm, respectively. Analysis of UV–vis spectra shows that ZnO's band gap has increased from 3.19 eV to 3.23 eV as the mole concentration has increased. The spherical nature and nano size of the ZnO are confirmed by the pictures obtained using field emission scanning electron microscopy (FE-SEM) and transmission electron microscope (TEM). The presence of elements zinc and oxygen in the Zn2+ and O2− ionic states are revealed by X-ray photoelectron spectroscopy (XPS). Electrical study demonstrates that the initial mole concentration of ZnO powder affected both its electrical conductivity and dielectric constant. The activation energy value of electrical conductivity for 1-mol and 4-mol is 0.661 eV and 0.552 eV, respectively. The impedance analysis shows the electrode effect for the 1-mol sample whereas it is not observed for the 4-mol sample, which is further confirmed by modulus analysis. The presence of defect in the 1-mol sample results in a lower conductivity (3.68 × 10−12 S/cm at 1 Hz) than the 4-mol sample. The comprehensive analysis confirms that the structural, spectroscopic and electrical properties of the ZnO nanoparticle can be tunable to meet demand by changing the feedstock mole concentration in the SPPS process.