Abstract
ABSTRACTIn this study, soymilk powder was produced by spray drying. The inlet air temperature of spray dryer was varied from 200 to 280°C and the feed concentration was varied from 15 to 25% (w/v). Response surface methodology was used to examine the effects of these independent variables on the detailed characteristics in terms of physical, structural, functional properties of powder. Overall, results show that rising the inlet air temperature caused a decrease in tapped and loose bulk density, true density, filling rate, water holding capacity, and water content of powder; and an increase in compressibility, Hausner ratio, porosity, interstitial air volume, and wettability index. An increase in feed concentration led to an increase in true density, compressibility, Hausner ratio, porosity, interstitial air volume, and wettability index; and a decrease in tapped and loose bulk density, filling rate, water holding capacity, and water content; whereas oil holding capacity might be increased or decreased and it depended almost solely on the feed concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.