Abstract
In high-speed gas metal arc welding process, weld defects like humping bead and undercutting appear and the weld bead quality worsens when welding speed exceeds a critical value. The previous investigations have proved that the backward flowing molten jet with high momentum in the weld pool is responsible for the formation of humping bead in high-speed gas metal arc welding. In this study, an external electromagnetic field generator is developed to change and control the flow condition in the weld pool and suppress the occurrence tendency of the humping bead. Bead-on-plate welding experiments are performed on mild steel Q235 test-pieces, and the influences of the exerted magnetic strength on the arc behavior, the fluid flow inside the weld pool, the weld bead shape and the weld penetration and width are investigated. The reason why the external electromagnetic field can suppress the humping bead is explained. The results show that external magnetic field can remarkably adjust the weld pool fluid flow field and decrease the momentum of the backward flowing molten jet. Therefore, weld defects like humping bead and undercutting can be effectively suppressed, the quality of weld bead is remarkably improved, and the critical welding speed is notably increased.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
