Abstract
This paper presents the results of experimental research to investigate blade material surface deterioration of wind turbines located in arid areas caused by sand particles impacts and the resulting influence on their energetic performance. Tests are conducted in the erosion sandblaster then in the wind tunnel for uncoated Glass Fiber/Polyester blade at various angles and durations impact. The magnitudes of aerodynamics forces on a Naca 4412 profile are determined experimentally. All profiles (AR=0.571) are tested in a wind tunnel at air speed of 10 m/s at Reynolds number 6.5 x 105. The results show the behavioral differences detected for the specimens with T =160 s, T = 240 s and T = 340 s (when Ra increases) by comparing them with the smooth specimen (T = 0 s, Ra= 0.94). Force coefficients (CL and CD) show significant changes which leads to a decrease of the lift-to-drag ratio and therefore there will be a notable performance loss. This will be an acceptable threshold for the case where t = 160s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Engineering Research in Africa
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.