Abstract
Selective laser melting (SLM) technology has been used to manufacture the AZ91D magnesium alloy. The relative density, microstructure, microhardness and tensile properties of the deposited AZ91D samples at different laser energy inputs were characterized. The results indicate that laser energy input plays a significant role in determining formation qualities of the SLMed samples. High density samples without obvious macro-defects can be obtained between 83J/mm3 and 167J/mm3. The SLMed AZ91D presents a unique layerwise feature in which the fully divorced eutectic β-Mg17Al12 distributing along the boundary of the equiaxed α-Mg matrix. The average size of α-Mg in overlapping regions is a little larger than that in the center of the scanning tracks due to the remelting process though the element distributions of Mg and Al are quite uniform. The microhardness of all samples shows directional independence. The microhardness and tensile strengths of the SLMed AZ91D at room temperature are superior to those of the die-cast AZ91D due to the combined effect of grain refinement and solid solution strengthening.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
