Abstract

Three different feed emulsions of different particle sizes were mixed with a modified starch and maltodextrin and spray dried to make a large (LP), small (SP), and nano-size encapsulated powder (NP), respectively. Emulsion size, oil content, loading capacity (LC), encapsulation efficiency (EE), water content, aw, scanning electron microscopy (SEM), glass transition temperature (Tg), as well as d-limonene release characteristic and limonene oxide formation rate during 37 °C and various aw storage were determined. With the increase of the feed emulsion size, the reconstituted emulsion size of the LP tended to increase and change to a bimodal distribution. The surface oil content increased with the increasing size of the reconstituted emulsion, and the opposite was true for EE. The smaller the reconstituted emulsion size, the higher Tg during a low aw condition. The Tg of the LP, SP and NP were 62, 88, and 100 °C, respectively, and NP > SP > LP. The release and the oxidative rate of d-limonene was the lowest for the NP and then increased for the SP and LP. The release and oxidative rates increased with the elevation of aw and peaked at 0.33. The powder surface morphological structure was intact, the spray-dried powder was more stable, and microstructure changed from a glass state to a rubbery state during storage.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.