Abstract
SummaryThis study evaluates the effect of elevated temperature exposure on concrete incorporating ferronickel slag (FNS) as a replacement of natural sand. Concrete cylinders were exposed up to 800°C, and the changes in compressive strength, mass, ultrasonic pulse velocity (UPV), and microstructure were investigated. The concretes containing up to 100% FNS aggregate showed no spalling and similar cracking to that of the concrete using 100% natural sand. For exposures up to 600°C, the residual strengths of concretes containing 50% FNS were 7% to 10% smaller than the concrete with 100% sand. Use of 30% fly ash as cement replacement improved residual strength by pozzolanic reaction for exposures up to 600°C. An equation has been found from the correlation between residual strength and UPV. Therefore, UPV can be used as a nondestructive test to estimate the extent of postfire damage and residual strength of concrete incorporating FNS aggregate and fly ash.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
