Effect of electron beam irradiation on the properties of ethylene‐(vinyl acetate) copolymer/natural rubber/organoclay nanocomposites

Abstract

AbstractThe effects of electron beam (EB) irradiation on the morphology, crosslink density, and tensile properties of EVA/SMR L (Standard Malaysian Rubber)/organoclay nanocomposites prepared by a melt‐blending technique were investigated. All the samples were irradiated by using a 3.0‐MeV EB apparatus with doses ranging from 50 to 200 kGy. Organoclay loading was varied from 0 to 10 phr (parts by weight per hundred parts of resin). X‐ray diffraction results and transmission electron microscopy images proved that the dispersion of organoclay in the nanocomposites was slightly improved by EB irradiation. The gel fraction yield for the nanocomposites increased with irradiation dose but decreased with organoclay loading. However, at 200 kGy, the gel fraction yield was almost the same at all organoclay loadings. Tensile strength and stress at 100% elongation increased proportionally with the irradiation dose. Elongation at break of the nanocomposites increased up to 100 kGy but then decreased at higher irradiation doses. The intercalation and exfoliation of the organoclay, the barrier effect, and the Hofmann degradation of the modification agent are the three major factors leading to the improvement of the properties of the irradiated nanocomposites. J. VINYL ADDIT. TECHNOL., 2009. © 2009 Society of Plastics Engineers